Home     About Kittiwake     Global Network     Info Centre     News     Contact Us

Home >> Machinery Condition >> Equipment

ANALEXpqF

ANALEXpqF Ferrous Debris Monitor FG-K16000-KW

Condition monitoring of gearbox lubricants and compressor lubricants is an established method of predicting and avoiding impending machinery breakdown. Using Wear Debris Monitoring, worn parts can be identified early and replaced before any serious damage occurs. In this way, production can be maintained, machinery life extended and the return on capital investment increased.

The ANALEXpqF is a manually operated Ferrous Debris Monitor. The PQF is designed to detect ferrous wear debris in the oil or grease samples taken from lubricated machinery. Designed for use in the field, this unit is ideal for testing and analysing oil samples on-site or in remote locations where full laboratory analysis is not possible.

Analex Ferrous Debris Monitors are constructed using sophisticated dual-coil magnetometers for greater measurement accuracy and sensitivity.

A sample of oil containing ferromagnetic particles is placed upon the sensor, thus altering the balance between the coils. The resulting 'out-of-balance' signal is amplifid, filtered and displayed as a PQ Index, which relates directly to the mass of the ferromagnetic debris in the sample.

Samples may be presented for analysis in a variety of media. Automatic recalibration is performed between each sample measurement. Data from each test is stored in the internal memory, which may then be transferred to a database on a host PC via an RS232 interface.


Features

Supplied ready for use in a protective, portable carrying case, suitable for testing on-site in remote locations.


All data stored is stored in the internal memory for later analysis and download.


Automatic recalibration between measurements for highly accurate results.



Click here to view the ANALEXpqF Instruction Manual.

Specifications

Display Resolution:

5 PQ

Fuse Rating:

2.5A 250 VAC HRC A/S T Ceramic

Lid Open Detection:

Opto Reflective Sector

Measurement Range:

0-2000 PQ

Operating Temp. Range:

15 - 35ºC 60 - 100ºF

Power:

110 to 250 VAC autoselected 50/60 Hz

Repeatability:

Typically +/- 15 PQ or +/- 3% of average reading (whichever is greater)

Sample Bottle:

Standard 100ml bottles or 2ml pots

Sample Bottle Detection:

Opto Reflective Sector

Test Time:

< 5 minutes to stabilize from power on <15 seconds per sample

Weight:

1.4 kg

Want to know more?
Contact Kittiwake here

For other related products see also:
ANALEXfdM
ANALEXpqA
ANALEXpqM
ANALEXrpd

Download PDF of ANALEXpqF Ferrous Debris Monitor  Yellow Arrow

To view the document you will need Adobe Acrobat Reader installed on your system. If you do not have it click here to proceed to Adobe's website to download it.