• On-Line Sensor Suite HMI

  • Real time condition monitoring on critical plant

  • Can be installed in any lubrication line
Quick Contact
This question is for testing whether you are a human visitor and to prevent automated spam submissions.
Enter the characters shown in the image.

Related Products

Sensor Suite HMI Version

Sensor Suite HMI versionA combination of the sensor range with display and logging capabilities, the 'Sensor Suite HMI' has been developed to offer real time condition monitoring on critical applications such as Industrial Gearboxes and Gen Sets.

Able to provide more than 40 parameters in real time, the Sensor Suite HMI allows the operator to remotely monitor the evolution of any significant change in the lubricant. The full automation of this product eliminates any risk of sampling errors introduced by the operator. Data is displayed locally on a 6" Human Machine Interface (HMI) colour display and stored locally in a Compact Flash Card (also accessible via Ethernet). Data can also be streamlined via ModBus over RS485 or via the major Network / protocols (on request).

Sesnor Suite HMIDesigned to be installed in any lubrication line using just two 1/2" BSPP ports, the suite reports metallic wear debris mass, oil condition, moisture and metallic ferrous / non-ferrous debris counts in the lubricant. Housed in a robust enclosure well suited for a wide range of applications, the product includes the Total Ferrous Debris Sensor, Moisture Sensor, Oil Condition Sensor and Metallic Wear Debris Sensor.


Power Input:115/240 V AC 50/60 Hz
Power Consumption:3 A max
Fuse Ratings and Type:Sensor Power: 5 A 20 mm quick blow
Port Connection:1/2" BSPP cone fitting
Fluid Compatibility:

Petroleum and synthetic oils
Compatible with most ester based oils
Do not use with water / oil emulsions

Maximum Fluid Viscosity:350 cSt @ 40°C [104°F]
Maximum System Fluid Pressure:10 bar [145 psi]
Minimum Fluid Flow:1.3 litre/min
Maximum Fluid Flow:9 litre/min
Permitted Fluid Temperatures:0°C to 65°C (32°F – 149°F)
Ambient Operating Temperature:0°C to 65°C (32°F – 149°F)
IP rating:IP 65
Weight:24.5 kg [54 lb]

0-500 parts per million [ppm] un-combined ferrous debris by weight
Oil Quality Units 1-100 Index Scale
0-100% Relative Humidity
0 to 100°C [32 - 212°F] temperature
10 x Fe Accumulator Bins sizes 40 to 1200 µm
10 x non Fe Accumulator Bins sizes 135 to  1200 µm
10 x Fe 'rate of change' Bin /Minute sizes 40 to 1200 µm
10 x nFe 'rate of change' Bin / Minute sizes 40 to 1200 µm

Part NumberDescription
FG-K19401-KWSensor Suite HMI
Contact Parker Kittiwake for information about the wide range of installation accessories and alternative options that are available to suit your specific application.

On-Line Sensors

Latest News

Parker Kittiwake Launches New CAT Fines Test Kit
Test kit detects catalytic fines to prevent irreparable damage to fuel pumps, injectors, piston ring... Read More...
Switching Fuel Oil and the Risk of Loss of Propulsion
Nearly nine months have passed since the 0.1% sulphur limit for marine fuels in designated Emissions... Read More...
Measuring Ferrous Wear: the FWM vs. the Analex fdMplus
When it comes to detecting and analysing machine wear, testing for ferrous density – the prese... Read More...